حساب تابت الجذب الكوني G

ملخص

The gravitational attraction between lead spheres. The data from the demonstration can also be used to calculate the universal gravitational constant G.

Photo courtesy Clive Grainger

How it works:

The Cavendish apparatus basically consists of two pairs of spheres, each pair forming dumbbells that have a common swivel axis (figure 1). One dumbbell is suspended from a quartz fiber and is free to rotate by twisting the fiber; the amount of twist measured by the position of a reflected light spot from a mirror attached to the fiber. The second dumbbell can be swiveled so that each of its spheres is in close proximity to one of the spheres of the other dumbbell; the gravitational attraction between two sets of spheres twists the fiber, and it is the measure of this twist that allows the magnitude of the gravitational force to be calculated.

figure 1. the twin dumbbells of the Cavendish experiment

The Cavendish apparatus we currently use is built by PASCO. 1 The quartz fiber and smaller dumbbell are enclosed in a metal case with glass window for protection. A plan view of the spheres and dimensions are given in figure 2. A HeNe laser is used to provide the spot reflection. When the apparatus is used quantitatively, the swing-time method is usually employed to calculate G.

figure 2. Plan view of double dumbbell layout

The large dumbbell is rotated on its axis so that the spheres press up against the glass shield next to the smaller spheres (see figure 2). The gravitational attraction between the spheres exerts a torque on the quartz fiber which twists through a small angle. The position of the reflected spot is noted and the large dumbbell is moved to its second position on the other side of the glass; gravitational attraction twists the fiber in the opposite direction. The response time of the spot to move to the second position and the final spot position are noted. The speed with which the fiber can respond to the move depends upon its torsional constant κ, which can be calculated by measuring the period of oscillation of the fiber,

The applied torque due to the gravitational attraction τ=κθ where θ is the maximum angle of deflection of the light spot. At this maximum deflection, the force between a large sphere and a small sphere is

where r is the distance between sphere centers. It is related to the torque by τ=F(L/2) where L is the length of the small dumbbell. So the gravitational constant can be calculated by

Note that, as the mirror turns through an angle θ, the reflected light moves through 2θ. So by reversing the dumbbell an angle of 4θ is measured.

Data for this particular apparatus are given in table 1.

table 1. Cavendish apparatus data

 torsion constant κ 3.10 ± 0.10 x 10-8 N m (calculated from PASCO specs and direct measurement) oscillation period T 498.2 ± 6.0 s (from direct measurement) max. excursion angle less than 5 x 10-2 radians, or less than 3 degrees (from direct measurement) when large masses moved from one position to another equilibrium angle θ 5.40 x 10-3 radians [0.310 deg] ± 15% (from direct measurement) small sphere separation r from PASCO spec: 46.5 mm when large mass is against the case and small ball is in the center position within the case. Note that the accuracy of this value depends upon how well the balance is centered within the case. large sphere mass M 1500 g (from spec) small sphere mass m 38.3 ± 0.2 g (from spec) distance from center of small mass to torsion axis 50 mm (from spec)
Setting it up:

This experiment uses a very sensitive apparatus that requires patience and finesse to properly set up. Consult the printout of the PASCO user manual in the blue "Cavendish Experiment" folder in the filing cabinet.

• First find a stable platform and place it in the lecture hall. Although the balance has feet that can be adjusted to make it level, for best results the platform should be reasonably level as well.
• The PASCO balance currently in use is very sensitive, so to protect against damaging the torsion ribbon during transit the apparatus should be carried gingerly into the lecture hall and placed onto the platform.
• Remove the front plate of the balance to expose the small dumbbell and the adjustable support arms that immobilize it during transit. Lower the support arms so that they do not interfere with the dumbbells. Adjust the feet so that the entire apparatus is level, and replace the front plate.
• Use the yellow wire to electrically ground the apparatus. Place the large masses in the "neutral" position so that they are perpendicular with the small masses inside.
• At this point the dumbbell is probably moving quite a bit within the case; as the balance settles down, set up the laser at the appropriate distance and angle for the audience.
• The dumbbell vibrations will usually dampen-out after about 20 minutes. For faster setup, the motions can be dampened by slowly raising and lowering the support arms. If after settling the dumbbell continues to change direction abruptly, this means that the torsional equilibrium of the ribbon has strayed too far from where it should be, and the ribbon needs to be "zeroed."
• To zero the balance, start by carefully loosening the thumbscrew sticking out of the top of the main shaft. Also near the top, the large round knob attached to the elastic belt is used to change the direction of the ribbon (notice that there is a fine and a coarse adjustment knob). Wait until the dumbbell has made its full excursion in the direction of the needed adjustment to minimize added oscillation. Carefully re-tighten the thumbscrew (not too tight) and dampen the vibrating dumbbell as necessary. Repeat until zeroed.

The apparatus was originally invented by the Rev. John Michell in 1795 to measure the density of the Earth. It was modified by Henry Cavendish in 1798 to measure G and subsequently by Coulomb to measure electrical and magnetic attraction and repulsion. Apart from the historical significance of the experiment, it's really neat to see that you can measure such an incredibly weak force using such a simple device.

In a lecture hall setting the Cavendish apparatus is too small for the audience to see its workings. A large scale model of the dumbbell and fiber components are a good idea to help explain what's going on. We have built such a model from wood and brass, with dumbbell arm lengths of 50cm and the small dumbbell hanging from a copper wire. The larger spheres, made of wood, have magnets enclosed and the smaller spheres, of Styrofoam, have steel ball bearings at their centers.

فيديو

«الرجوع للقسم»
تصميم وبرمجة المتحدة لخدمات الانترنت

جميع الحقوق محفوظة © لموقع لغة الروح